Tuesday, February 11, 2014

11/2/2014 (Tuesday)

Next week is our Beta Test so our group try to complete as much as we can.

As a logistic, today my task is to sew the Arduino Flora board into gloves and also built up kiosk (100%). I bought sewing kit, thread and also black cloth from Daiso and started to sew. 
Firstly I cut two small piece of cloth (based on the Arduino board size. After that I sew them 2gether (3 side, the unsew part is for me to take out the Arduino easily.) After that, I sew 2 button on the unsew part to prevent the Arduino will come out.



This is the inner part of the glove.

After that, we test the Arduino board in computer. We had try many times to make sure the foil is conducted with the Arduino.  In the beginning we only connected to one pin but after that we connected the pin with the GND pin, it works. Which means, two pin must be tied together.


After I finished sewing the gloves, Charissa and I applied masking tape onto the camera border so that it will be more secure and not easily broken.




Around 5pm , we started to set up our game kiosk. 






5/2/2014 (Wednesday)

We had our Alphe Test at 3pm today. Our group reached IIS Lab at around 10pm and we started to do our own task. My target for today is to build out the border of the kiosk and also the camera box.

I cut out and leave some gap so that the wires and be placed nicely.



This is the border structure of our kiosk.
Before.

After.






Tuesday, February 4, 2014

4/2/2014 (Tuesday)

Before the Chinese New Year break, we already been told that we have to complete our installation during the Alpha test. During the Chinese New Year break, we didn't have any meeting. 

The day before alpha test (today), we had our meeting at 12.30pm. Our task is to complete the code we need to fix and also try on the Adafruit Wearable Arduino. When technical leader and graphic leader was having their discussion, I tried to complete my logistic work so that it will save more time for me to do other work in the next coming two weeks.


I decide to paint our #hashtage photo op. There was one tin of white paint for me to paint (which was used by my classmate for their previous installation). Firstly I use sand paper to remove roughness of the planks. After that, I painted the first layer for each plank and waited them to dry. After few hours I painted them again for a more complete outcome. It took almost 6 hours for me to paint all the planks.